PRODUCT HIGHLIGHT: ChekVolt®

---

The ChekVolt® Non-Contact Enclosure Voltage Portal reduces arc flash risks and increases electrical safety by providing maintenance personnel a no-touch voltage portal on the outside of grounded metallic electrical enclosures.

GRACE ENGINEERED PRODUCTS
ChekVolt® Part #: R-1A003
Stand Alone Insert

UL TYPE 4, 4X, & 12 RATINGS
The ChekVolt® interface, installed on an electrical panel, allows maintenance people to use a non-contact voltage detector ´pen´ to check line voltage before and after they open the main disconnect. The ability to pre-verify electrical isolation before opening a panel puts an additional safety measure between electricians and hazardous voltage. Standard yellow nameplates help remind personnel to pre-verify every voltage point before accessing the panel interior.

FEATURES:

---

> Integral 6 Foot Lead Wire.
> Intalls in a ½" hole for Easy Installation.
> Rugged Polycarbonate Construction for Safety.
> UV Outdoor Rated so you can Mount it Anywhere!
> Cost less than $15.00 per point!


Maintenance people carry non-contact voltage detector 'pens' to quickly verify the presence of voltage in a conductor. These devices beep or flash in the presence of voltage. The ChekVolt® simply extends the line voltage from the main disconnect (or other voltage source) through a wire into an encapsulated non-metallic assembly fastened to the enclosure exterior.

The ChekVolt® interface installs into a ½" (13mm) drilled hole. All nameplates simplify field installations with drilling locator tabs. Install Qty (3) R-1A for 3-phase applications.